JOMAX 269
Horizontal machining center JomaX 269 with moving column is distinguished by operational flexibility due to wide range of customizations and tools, table change system, tool change system, milling heads which allow executing full cycle of machining: from rough to finish in one machine
Quote request
- Powerful milling head with power drive
- High speed milling head with motorspindle
- Transmission on Y-axis:
- ball screw diameter is 2100 m
- 2 Heidenhein pressurized optical scales
- accurate gantry arrangement
- ram deviation offset
- Dual air hydraulic counter-balance:
- ram deviation offset
- lower system deterioration
- Х-axis:
- pinion-rack transmission with electronic compensation
- 2 guides of 150 series (4+4 sliding blocks) for each side
- Heidenhein pressurized optical scales
- Y-axis: - 2 guides of 100 series(3+2 sliding blocks)
- Z-axis:
- 2 guides of 100 series(4+4 sliding blocks)
- Heidenhein pressurized optical scales
- High dynamics of acceleration and speed in high-volume chip removal
- High torque of polar axes A and C
- Maximum structural rigidity provides excellent volumetric accuracy
- Online geometric compensation system for dynamic deformations
- High configurability and compactness
- Working mode without operator
- General machinery
- Energy industry
- Nuclear industry
- BUSS-system:
- located on the indexed or continuous С-axis
- extra high clamping force 180 000 Н
- mechanical heads and heads with motorspindle can be mounted as an option
- Measuring devices/ measuring probe system:
- probe RMP60 Renishaw
- probe MULTI 20.00 M&H
- Fixed laser device for presetting BLUM
- Tool cooling system:
- aerosol
- air blow
- water cooling system with filtration and coolant reservoir
- Table change system
- Tool magazine:
- different solutions for tool magazines
- fixed chain type mounted on the platform(from 16 to 40 positions) or on the gantry with arm for tool automatic change (from 30 to 80 positions)
Specifications | Units | JOMAX 269 | |
Axis stroke | |||
X-axis (longitudinal) | mm | 3500 | |
Х-axis (options) | mm | 6500/8500 and others | |
Y-axis (vertical) | mm | 22500/3000/3500/4000 | |
Modular solutions | mm | 2000 | |
Z-axis (transversal) | mm | 1250/1500 | |
Axis speed | |||
Travel speed on linear axes | m/min | till 28 | |
Accelerate travel | m/sec2 | till 1 |